Stall at ILS
Stall at ILS
Hello guys!
I don´t found a solution?
I have p3d v6 and jh 60.2.
At the ils rw 28 at EDDN the ac did not reduce the speed on the open descent like the pfd.
Did anyone have a idea whats wrong?
Best regards
peter
I don´t found a solution?
I have p3d v6 and jh 60.2.
At the ils rw 28 at EDDN the ac did not reduce the speed on the open descent like the pfd.
Did anyone have a idea whats wrong?
Best regards
peter
You do not have the required permissions to view the files attached to this post.
----------------------------------------------
D-AIPB
D-AIPB
-
- Posts: 17
- Joined: Tue Nov 28, 2023 9:39 pm
- Location: LFGA
Re: Stall at ILS
We are several to have the same problem since last version
Let's wait for JL's return
Let's wait for JL's return
Joël
www.cockpit-a320.com
www.cockpit-a320.com
Re: Stall at ILS
Hello Joel,
are you going back or stay at this version?
Best regards
peter
are you going back or stay at this version?
Best regards
peter
----------------------------------------------
D-AIPB
D-AIPB
-
- Posts: 17
- Joined: Tue Nov 28, 2023 9:39 pm
- Location: LFGA
Re: Stall at ILS
Hello Joel!
I test with the tip of jl.
At the evening i fly 2 leg!
But without any weather inject!
Best regards
peter
I test with the tip of jl.
At the evening i fly 2 leg!
But without any weather inject!
Best regards
peter
----------------------------------------------
D-AIPB
D-AIPB
-
- Posts: 17
- Joined: Tue Nov 28, 2023 9:39 pm
- Location: LFGA
Re: Stall at ILS
It's because module simpatcher was not installed.
Lauch the A320FMGS setup and check the box Master P3D PC
Add on file dll.xml (C:\ProgramData\P3d Folder) :
<Launch.Addon>
<Name>SimPatcher</Name>
<Disabled>False</Disabled>
<Path>C:<Path>C:\A320FMGSA320FMGS\SimpatchSimpatch\SimPatcher.dll</Path>
</Launch.Addon>
Look on installation Guide page 30.
Lauch the A320FMGS setup and check the box Master P3D PC
Add on file dll.xml (C:\ProgramData\P3d Folder) :
<Launch.Addon>
<Name>SimPatcher</Name>
<Disabled>False</Disabled>
<Path>C:<Path>C:\A320FMGSA320FMGS\SimpatchSimpatch\SimPatcher.dll</Path>
</Launch.Addon>
Look on installation Guide page 30.
Joël
www.cockpit-a320.com
www.cockpit-a320.com
Re: Stall at ILS
Hello Joel!
Did it work for you with the simpatcher?
I have searched at the dll.xml the last version where i had the entry of the simpatcher war at version 4.
At 5 and 6 i did not found such a entry.
Can anyone confirm this?
Best regards
peter
Did it work for you with the simpatcher?
I have searched at the dll.xml the last version where i had the entry of the simpatcher war at version 4.
At 5 and 6 i did not found such a entry.
Can anyone confirm this?
Best regards
peter
----------------------------------------------
D-AIPB
D-AIPB
-
- Posts: 17
- Joined: Tue Nov 28, 2023 9:39 pm
- Location: LFGA
-
- Posts: 25
- Joined: Mon Nov 14, 2022 11:08 pm
Re: Stall at I
This is a recurring problem and I don’t think we have got to the root of it.
I recently bought a new PC and moved to P3D v6. As I now have more power I have the FMGS server on the flight sim PC.
As I built up my software I was using the same short test flight after each installation.
Everything including ILS speed control was fine until I installed Active Sky, this is not on the FS PC but requires running an executable file on the FS PC, I don’t know what it does.
ILS speed control has now malfunctioned as the original poster of this topic describes.
I tried a flight with Active Sky off but the problem di still there.
I have had this with previous installations and it is very frustrating, I wish we could get to the bottom of it.
Barry
I recently bought a new PC and moved to P3D v6. As I now have more power I have the FMGS server on the flight sim PC.
As I built up my software I was using the same short test flight after each installation.
Everything including ILS speed control was fine until I installed Active Sky, this is not on the FS PC but requires running an executable file on the FS PC, I don’t know what it does.
ILS speed control has now malfunctioned as the original poster of this topic describes.
I tried a flight with Active Sky off but the problem di still there.
I have had this with previous installations and it is very frustrating, I wish we could get to the bottom of it.
Barry
Re: Stall at ILS
Hello
ActiveSky is officially released for P3D V6.x - maybe this can fix the problem.
https://cruiselevel.de/nun-offiziell-ac ... d-x-plane/
ActiveSky is officially released for P3D V6.x - maybe this can fix the problem.
https://cruiselevel.de/nun-offiziell-ac ... d-x-plane/
Greetings
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
-
- Posts: 25
- Joined: Mon Nov 14, 2022 11:08 pm
Re: Stall at ILS
I am using Active Sky for P3D v6.
Barry
Barry
-
- Posts: 179
- Joined: Fri Nov 04, 2022 4:07 pm
- Location: EDDL
Re: Stall at ILS
also using last version of FMGS and Active Sky.
No such issues with p3dv5.4
No such issues with p3dv5.4
Regards
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
-
- Posts: 25
- Joined: Mon Nov 14, 2022 11:08 pm
Re: Stall at ILS
With DLL.xml in two places, both with FMGS Simpatcher routine and after some fiddling with various sleep times it is all working again.
I don’t understand why it was working until I loaded Active Sky, presumably Simpatcher was correctly installed by default before.
Could executing the Active Sky exec file really have deleted the Simpatcher routine? I wouldn’t have thought so.
I really don’t understand this stuff. Will it keep working? I hope do as I have come visitors booked.
Barry
I don’t understand why it was working until I loaded Active Sky, presumably Simpatcher was correctly installed by default before.
Could executing the Active Sky exec file really have deleted the Simpatcher routine? I wouldn’t have thought so.
I really don’t understand this stuff. Will it keep working? I hope do as I have come visitors booked.
Barry
Re: Stall at ILS
UNder P3D V4, V5 and V6 you should have an addon xml file in your folder
C:\Users\Your_User\Documents\Prepar3D vX Add-ons folder (adapt You_User and P3D vX folders of course)
That file should tell P3D where to look for the simpatcher location.
Some addons interfere with the proper functionning of Simpatcher. This happens in the first minutes after P3D launch.
To work around that issue, you can set a timed delay before the simpatcher starts working to do it's magic. The delay can be changed in the file
C:\A320FMGS\SimPatch\simpatchConfig.ini (adapt to your install folder of course)
Change the sleepTime variable, I use 180000 (that is in milliseconds, so 3 minutes here). You can go a bit higher to 4 minutes I suppose, only limitation is you should not try to fly before this delay is passed, otherwise you may stall... but you can start preparing the flight normally.
C:\Users\Your_User\Documents\Prepar3D vX Add-ons folder (adapt You_User and P3D vX folders of course)
That file should tell P3D where to look for the simpatcher location.
Some addons interfere with the proper functionning of Simpatcher. This happens in the first minutes after P3D launch.
To work around that issue, you can set a timed delay before the simpatcher starts working to do it's magic. The delay can be changed in the file
C:\A320FMGS\SimPatch\simpatchConfig.ini (adapt to your install folder of course)
Change the sleepTime variable, I use 180000 (that is in milliseconds, so 3 minutes here). You can go a bit higher to 4 minutes I suppose, only limitation is you should not try to fly before this delay is passed, otherwise you may stall... but you can start preparing the flight normally.
Regards,
Jean Luc
Jean Luc
-
- Posts: 25
- Joined: Mon Nov 14, 2022 11:08 pm
Re: Stall at ILS
Jean Luc
It is these bits of information that help us non computer experts to understand what is going on.I can see that possibly adding Active Sky did disturb the functioning of Simpatcher. Also as I did not understand what sleeptime did. I may have unknowingly shut down P3D too soon when Simpatcher was not shown, I should have waited.
Pleased that I am flying reliably again but still some challenges; I hope that I can use my large Orbx library before long.
Best wishes for the New Year.
Barry
It is these bits of information that help us non computer experts to understand what is going on.I can see that possibly adding Active Sky did disturb the functioning of Simpatcher. Also as I did not understand what sleeptime did. I may have unknowingly shut down P3D too soon when Simpatcher was not shown, I should have waited.
Pleased that I am flying reliably again but still some challenges; I hope that I can use my large Orbx library before long.
Best wishes for the New Year.
Barry