No Thrust in TOGA Position

Ask questions regarding software support here
Post Reply
Frank
Posts: 1
Joined: Wed Jul 29, 2020 5:47 pm

No Thrust in TOGA Position

Post by Frank »

Hello,

since the last update, the engines react very strange. In the TOGA position, the engines only run up to an output of 25%. But this error does not always occur immediately. Occasionally a start succeeds, but then the engines lose power in flight until a stall-warning occurs. :(
What am I doing wrong? I use the current version 53.3.6, the current Skalarki Profiler and Prepar3D V5.

Thank you in advance for your help! :)
Frank
You do not have the required permissions to view the files attached to this post.

jeehell
Site Admin
Posts: 45
Joined: Mon Jun 15, 2020 9:36 pm
Location: France
Contact:

Re: No Thrust in TOGA Position

Post by jeehell »

This is an issue with icing on asp3d.
You need to disable icing in the c:\a320fmgs\fmgs server\perf\cfm\aircraft.ini

I don't recall the exact line to change, I will try to find that later.
In the meantime you should use anti ice all the time...
Regards,
Jean Luc

pe_martin
Posts: 7
Joined: Tue Jun 16, 2020 8:59 am

Re: No Thrust in TOGA Position

Post by pe_martin »

Try this solution!
https://www.mycockpit.org/forums/showth ... post177189
best regards
peter

bbruechmann
Posts: 37
Joined: Tue Jun 16, 2020 8:33 am
Location: Germany - Rostock

Re: No Thrust in TOGA Position

Post by bbruechmann »

Frank wrote:
Sat Aug 01, 2020 8:42 am
Hello,

since the last update, the engines react very strange. In the TOGA position, the engines only run up to an output of 25%. But this error does not always occur immediately. Occasionally a start succeeds, but then the engines lose power in flight until a stall-warning occurs. :(
What am I doing wrong? I use the current version 53.3.6, the current Skalarki Profiler and Prepar3D V5.

Thank you in advance for your help! :)
Frank
add the line AUTOICE=NO into the ini as JL mentioned
Bernd

P3D V5 - PC spec: Intel i9-9900 overclocked 5 GHz, 32 GB RAM, GPU Nvidia RTX2080, M2 SSD, Skalarki HomeCockpit JH FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA

Post Reply