JeeHell FMGS forums

Bonjour Lean-Luc,
after update to 60.05 and 60.06, the CPT PFD and ND do not display.
The screen stays dark.
They are connected to the same computer on which A320FMGS is running, so no
network problem. I am running P3Dv5.4 . Everything else seems to run.

I double checked everything that I could think of, but still dark screens.
- Screen is recognized by Windows
- PFD and ND installation are ticked
- .bin files are updated
- Server shows PFD and ND connected
- PFD and ND screens are started but stay dark
- changing aircraft options from EIS 1 to 2 and vice versa does not change anything
- separate start of PFD.exe and ND.exe (both as administrator) does not change anything.

Would you or anybody else have an idea what else to do?
I am stuck for the moment.
Thanks for your help
Best Regards
Fritz

Check, if the PFD or ND screen is maybe just minimized or hidden somewhere.
No sure, if a frame can be activated by one of the cfg files for better findability.

Thanks for your recommendations, Michael.
I found out that the fourth screen (beamer) was disconnected.
After reconnection, everything works fine. Problem is solved.
Best Regards
Fritz