JeeHell FMGS forums

Hello,

here is the latest version:
https://www.jeehell.org/A320FMGS_B59.1.3.exe

If you update from B58.x or earlier: YOU MUST RECOMPILE THE NAVDATA!!!


The release log:

21/09/2023 59.1.2
-Added Xwind fix for P3D V6.0.35.31017
-Fixed ENGRUN strter command
-Fixed getting stuck in abnormal attitude law when repositionning. If you get stuck in it, go in any P3D option window then back to the simulation again.

15/09/2023
-Added Xwind fix for P3D V6.0.34.31011

10/09/2023 59.0.0
-Official P3D V6 support
-Implemented basic Take Off Performance tool
-Implemented FDS motorized Trim wheels
-Added FDS TCP clock support
-Implemented Flight Illusion Triple Brakes Gauge
-Tried to fix some bugs with Skalarki LDG ELEV potentiometer
-Fixed symulatory spoilers arm/disarm bug
-Fixed 8.33khz support with P3D
-Fixed managed speed target in LDG CONF3
-Fixed wet cranking not always turning Fuel Flow on

Thanks for the Update

Great job, works like a charme… and thanks also for adding the 8.33 support.

Best regards
Micha

Hi JL, many thanks for solving the 8.33 kHz problem just in time at the beginning of VATSIM´s trial in D/NL/UK.
Just completed an online test flight from EDDV to EGKK without any problem.
EDIT due to getting asked: Running Prepar3D v5.3
Only one issue outside the flight itself: The new Performance Tool gave an Access Violation error "at adress 00000000".

Hello JL!
I can agree!
Best regards
peter

Buford wrote: ↑Sun Sep 10, 2023 6:55 pm Hi JL, many thanks for solving the 8.33 kHz problem just in time at the beginning of VATSIM´s trial in D/NL/UK.
Just completed an online test flight from EDDV to EGKK without any problem.
Only one issue outside the flight itself: The new Performance Tool gave an Access Violation error "at adress 00000000".

Do you have ADACALC.dll in PERF_EFB folder? if not copy it from FMGS Server folder.

Hello Jean Luc
Thank you for continuing to work on this project!
I also get the error message with the performance tool (it keeps coming, every second) and the file ADACALC.dll is in the PERF_EFB folder

did you recompile the navdata bin files?

I deleted all the bin files in the ...\A320FMGS\Navdata folder and when I started up I had a % display in the MCDU and it worked perfectly again

on which PC did you put the perf Tool?
Make sure you have the c:\A320FMGS\Aircraft folder (with the A320 folder inside)
and c:\A320FMGS\PERF folder (also with it's sub folders).
You can copy them from FMGS Server PC if needed.

Same here, still the error, ADACALC.dll in PERF_EFB folder and new bins are in Navdata, Aircraft with A320, PERF folder with sub folders, all on same (P3D and A320 FMGS Server) PC. Only not on C:, but another drive, but I don´t think, that could be a reason?
EDIT: Copied it all to C: and (of course) still the same.

Same for me - new NAVDATA + DLL in directory - but getting same DLL error.

Best
Micha

did you delete the old BIN files before compiling the new ones?

jeehell wrote: ↑Mon Sep 11, 2023 7:49 pm did you delete the old BIN files before compiling the new ones?

Yes, as I let Pero‘ s cortemanager run. It deletes the old bins as first action.

jeehell wrote: ↑Mon Sep 11, 2023 7:49 pm did you delete the old BIN files before compiling the new ones?

Affirmative

jeehell wrote: ↑Mon Sep 11, 2023 4:02 pm on which PC did you put the perf Tool?
Make sure you have the c:\A320FMGS\Aircraft folder (with the A320 folder inside)
and c:\A320FMGS\PERF folder (also with it's sub folders).
You can copy them from FMGS Server PC if needed.

I'm facing the same issue. Recompiled the navdata and the dll is in the directory. The "c:\A320FMGS\PERF" is called "c:\A320FMGS\PERF_EFB" and also doesn't contain any sub folders as mentioned. It only hast the "PERF_EFB.exe" and "Adacalc.dll" in it. Maybe the installer is missing something?

After clicking on the .exe the form itself loads but then throws access violations at adress 00000000

I meant c:\A320FMGS\FMGS server\PERF folder

Okay I have this folder with the sub folders but still get the access violations.

Ok I found the issue, you need to copy borlndmm.dll from FMGS Server folder into PERF EFB folder.

(auto update should do it)

It works now - thank you very much

Hello JL,
i updatet all computers with the autoupdater, then i rebuilt the nav data.
the same issue as bevor, ever second a error message is come.

regards Pete

Do you have both the borlndmm.dll and adacalc.dll in your perf tool folder?

Hi JL,
yes both dll files are there.
Now i have copyed the 12 navdata Bin files in that folder and then it works without errors.

For me it works after updating… well done, many thanks!