JeeHell FMGS forums

Since updating to 58.0.4 I am hearing a Crash sound with the start of the FMGS server module. FMGS server is running on a dedicated pc.

Also after firing up the electricity, I am seeing warning messages on the ECAM about "L/G Gear Not Uplocked" and "Brakes A/SKID" off, allthough l/g is down and A/Skid is on.
Then during the flight there is no sound of the L/G being moved up after take off or down for landing.

When going back to 58.0.2 everything is fine.

Anyone else experiencing this?

Thanks,
Michael

I have the crashsound at startup too, and something that sounds like the landing gear. But if i retract or engage the landing gear i can hear it coming down or up as normal.

I can confirme this issue, in my cockpit on startup it is the same.

Same here. Crash and landing gear sounds on startup.

I made a new release today, please try to see if it makes any difference.

Hi Jean Luc,

Crash sound does not appear anymore! Also the L/G message at start up disappeared.
So this seems to be solved with the new version.

Remaining problem is, that I still don't hear the L/G retracting or engaging and no change in the wind noise, as before.

Michael, it seems you have a more serious issue with the sounds of your P3D, or something is broken of the connection between P3D sound engine and FMGS-Server. The LG-sound and the wind noise which changes depending by speed of the ac too are both sounds which are in control by P3D internally!
Same as with the engine sounds you had issues of spool up timing, if i remember correct.
Bear in mind, that Jeehell triggers the sounds ONLY but can´t control them.
For instance: When you toggle the LG handle in your cockpit the status change is read by Jeehell via the offsets for the FMGS part. In the same way, this is read by P3D which triggers then in P3D that the LG is moved up or down. In easy words it´s nearly the same as a keystroke.
The sounds which comes from Jeehell have nothing to do with the sounds in P3D.