JeeHell FMGS forums

Hi guys.
The B58 is installed, thank you Jean Luc for the improvements.
I take the liberty of explaining my pb to you as indicated in the subject.
so I suggest you look at this diagram to know the environment.
https://drive.google.com/file/d/1Q4cPFB ... sp=sharing
for your info the PC efis2 does not enter the subject.
-On the master PC, we use ASP3D, it regularly feeds the JL A320FMGS\WXR folder which is shared and visible to other PCs. there are 9 WXR1132 files at 40.dat of 801 k each. we create a rotten weather with heavy rain on our flight area in ASP3D options.
we have in the EGPWS_WXR.ini file of Master
[WXR]
OutputPath=D:\A320FMGS\WXR
[EGPWS]
OutputPath=\\192.168.1.116\egpws

then in Simu1
[WXR]
OutputPath=\\192.168.1.100\a320fmgs\WXR
[EGPWS]
OutputPath=D:\A320FMGS\EGPWS\EGPWS
DataPath=D:\A320FMGS\EGPWS\EGPWS data

then EFIS
[WXR]
OutputPath=\\192.168.1.100\wxr
[EGPWS]
OutputPath=\\192.168.1.116\egpws

We display the Terrain well but never the WXR despite the 255 brightness indicated in the MCDU
the tilt and other info are displayed well but no trace of precipitation on the NDs, nothing displayed, it worked under our previous installation in B55.
thank you all for your insights.
Gilles

no one has an opinion on this problem ?
best regards

Try to close the soft, delete all files in wxr folder and try again

this is ok now..... the sharing folder WXR of P3D computer was read only. the EIS Computer was able to read but no to fetch the file.
It's beautiful a crap wheather !!
gilles