Hi JeeHell,
I was just wondering if you have any ideas about what might be causing this issue.
Setup (Firewalls are off):
Prepared PC - Runs Prepar3d V5, Simconnect Server
JeeHell PC - Run FMGS server, OVH, Hardward connect, etc
With Prepared running unpaused, we start JeeHell on the second PC; all the processes start up, but the FMGS Server does not connect to the Perpared3d PC. To connect it, I need to close FXConnect.exe, reopen it, and then FMGS Server connects.
I initially thought it was a sequencing issue, but I'm unsure. I can write a script to close FXConnect.exe and reopen it, but I thought I ask if you had any ideas on how to fix this.
Connection to Prepar3d when using FMGS on a separate PC
Re: Connection to Prepar3d when using FMGS on a separate PC
do you start the FMGS suite AFTER P3D has been running for some time?
Do you use admin rights?
Do you use admin rights?
Regards,
Jean Luc
Jean Luc
Re: Connection to Prepar3d when using FMGS on a separate PC
Hi JL,
Generally, we launch Prepar3d V5 first, then open JeeHell on the second computer. Yep, we are running the starter as administrator. I've had a couple of times where it would not connect, and I had to restart Prepar3d several times.
I'm considering re-installing prepar3d, but I thought I'd check if something else might be the cause.
Additional details:
- Simconnect on the Prepar3d PC is configured for (Global) IPV4 on port 9017.
- JeeHell SimConnect points to the Prepare3d PC IPv4 address on port 9017.
- FSUIPC runs on the Prepar3d PC and WideFS on the JeeHell PC to accommodate the Skalarki Profiler (Overhead, Glare).
Thanks,
Jamie
Generally, we launch Prepar3d V5 first, then open JeeHell on the second computer. Yep, we are running the starter as administrator. I've had a couple of times where it would not connect, and I had to restart Prepar3d several times.
I'm considering re-installing prepar3d, but I thought I'd check if something else might be the cause.
Additional details:
- Simconnect on the Prepar3d PC is configured for (Global) IPV4 on port 9017.
- JeeHell SimConnect points to the Prepare3d PC IPv4 address on port 9017.
- FSUIPC runs on the Prepar3d PC and WideFS on the JeeHell PC to accommodate the Skalarki Profiler (Overhead, Glare).
Thanks,
Jamie
Re: Connection to Prepar3d when using FMGS on a separate PC
HI,
I've spent some more time looking at this and have changed the Simconnect port to 2048 to align with the setup of FSCommander, and it connects fine; however, after updating the Simconnect.cfg IPv4 port to 2048 in the FMGSServer folder, it still does not connect when starting JeeHell with the starter (run as admin).
Closing and restarting FXConnect generally works, but not always.
My next step is to look at the traffic at that port from the JeeHell PC.
Does anyone have any other thoughts?
I've spent some more time looking at this and have changed the Simconnect port to 2048 to align with the setup of FSCommander, and it connects fine; however, after updating the Simconnect.cfg IPv4 port to 2048 in the FMGSServer folder, it still does not connect when starting JeeHell with the starter (run as admin).
Closing and restarting FXConnect generally works, but not always.
My next step is to look at the traffic at that port from the JeeHell PC.
Does anyone have any other thoughts?
Re: Connection to Prepar3d when using FMGS on a separate PC
Hi Jean-Luc,
We've been working on the issue this evening and we've got more info.
We installed wireshark to monitor the traffic and when the Starter.exe is executed as admin, there is no communicated registed on either TCP or UDP to the P3d machine IP address on any port. However, after closing and re-opening the FXConnect.exe process. We see the SYN and the ACK then the constant traffic occurs on the SimConnect port.
We've tried two machines now and are currently using Prepar3d v. 5.3.17.28160; Simconnect v5.3.0.0. We are going to upgrade Prepar3d however, considering there is no request from Jeehell to Prepar3d on the network at startup we don't think its going to help.
Please let us know if you have any thoughts?
We've been working on the issue this evening and we've got more info.
We installed wireshark to monitor the traffic and when the Starter.exe is executed as admin, there is no communicated registed on either TCP or UDP to the P3d machine IP address on any port. However, after closing and re-opening the FXConnect.exe process. We see the SYN and the ACK then the constant traffic occurs on the SimConnect port.
We've tried two machines now and are currently using Prepar3d v. 5.3.17.28160; Simconnect v5.3.0.0. We are going to upgrade Prepar3d however, considering there is no request from Jeehell to Prepar3d on the network at startup we don't think its going to help.
Please let us know if you have any thoughts?
Re: Connection to Prepar3d when using FMGS on a separate PC
We updated Prepar3d; however, that did not resolve the issue. We have a workaround: open FXConnect first and then JeeHell via Starter.exe. We use the task scheduler in Windows to automate this when logged in.
Note: For anyone else using the task schedule, the action section needs to include the 'start at' which should be the PATH to the JeeHell install
Note: For anyone else using the task schedule, the action section needs to include the 'start at' which should be the PATH to the JeeHell install
Re: Connection to Prepar3d when using FMGS on a separate PC
could it be an admin right mismatch somewhere?
Regards,
Jean Luc
Jean Luc
Re: Connection to Prepar3d when using FMGS on a separate PC
Hello
Were you able to solve your problem? Jean-Luc once wrote to me that the network profile (on Windows 10) on both devices should be "Private" and not "Public". Maybe this will help?
Were you able to solve your problem? Jean-Luc once wrote to me that the network profile (on Windows 10) on both devices should be "Private" and not "Public". Maybe this will help?
Greetings
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google