FMGS to MSFS (Private MOD)

[Scorpi1987]

Recently I made a private mod that makes FMGS run on the MSFS.

First of all I would like to emphasise that I do not intend to get Jean-Luc in any way into the queer or anything like that, but the mod I made for private purposes surprised me so much in its functionality that I made it available to the wider community.

To make it easier for you to understand what exactly I did, here is a small overview.

Virtual Cockpit removed from the Asobo A320 .

Modification of the FMGS FBW settings of the APFBWcoeff.ini in the [AileronFBW] section

basically that's all I did

But I am a bit dissatisfied with the result, so I am currently working on a complete workaround of the FMGS model.

I am doing this so that the community can get a taste of what is possible with the MSFS,

I am aware that many things will not work at the moment
- Weather
- Some FSUIPC offsets are different than in FSX/P3D
- Light control
- ILS has some limitations or LOC is faulty at some airports

What works is :
-Display TCAS
-Display TERR
-Spoilers
-Flaps/Slats
-Gear
-Flight Controls
-AP

I hope I can continue to sweeten your time with the mod and we all hope for an official release

In this sense have fun with the MOD and good flights

[asessa]

follow

[Scorpi1987]

So beta Release 0.0.2b is out and will be available Soon on the Soarbywire Blog

[asessa]

So beta Release 0.0.2b is out and will be available Soon on the Soarbywire Blog

Great.. i hope to test it very soon

[spaceweather]

Thanks Sven for publishing that news! I will try that and will give feedback here.
And maybe you can work together with jeehell to create a offical and full working Jeehell Suite to fly with MSFS.
"Only together we are strong" ...

Regards
Andy

[Scorpi1987]

Thanks Sven for publishing that news! I will try that and will give feedback here.
And maybe you can work together with jeehell to create a offical and full working Jeehell Suite to fly with MSFS.
"Only together we are strong" ...

Regards
Andy

When i become feedback from Jean-Luc sure why not Iam open for everything

[Scorpi1987]

IMPORTANT MESSAGE !!!! When you using P3D and MSFS on the same system, please start FSXConnect.exe when using MSFS !!! Please make sure that the Actual SDK is installed .

The Current SDK you can Download here
https://sdk.flightsimulator.com/files/i ... 23.1.0.msi

[Scorpi1987]

It is an update available !!!

You can download it on my discord
https://discord.gg/fpbGNgw

On the Download Mod channel in Flight SIM Section

Changelog:
Improvements in aerodynamic
Improvements in FBW Controls
Added Asobo A320 engine sounds
Improved engine performance
No hopping when set flaps 2

[Scorpi1987]

Version 0.0.8b is out Now !!!!!
Please Delete all Previous Versions.
Follow the Instructions.txt

[Scorpi1987]

its Here, we arrvied V 1.0b there many changes in it

NEW MSFS FLIGHTMODELL REWORKED based on Asobo A320-NEO

Engine Data improved to NEO Values (FCOM DATA comes with 1.2 or 1.3)

Improved FBW Data - (because i dont have currently the API, i cannot make it better)

ILS - LOC Working with the new Navaids

Smother Landing



Due the old FBW PERF .. somtimes it comes to an dive on OPT.Climb, thats an issue that i have in P3Dv4 too when
i press OPT Climb the Elevater makes a "Jump" to Full Up or Down.



Be sure that the MSFS SDK ist INSTALLED !!!



Happy Flying

https://mega.nz/file/yYAGhCbR#2fRPJd8kB ... nfAYFUonbM

[MikeN]

its Here, we arrvied V 1.0b there many changes in it

NEW MSFS FLIGHTMODELL REWORKED based on Asobo A320-NEO

Engine Data improved to NEO Values (FCOM DATA comes with 1.2 or 1.3)

Improved FBW Data - (because i dont have currently the API, i cannot make it better)

ILS - LOC Working with the new Navaids

Smother Landing



Due the old FBW PERF .. somtimes it comes to an dive on OPT.Climb, thats an issue that i have in P3Dv4 too when
i press OPT Climb the Elevater makes a "Jump" to Full Up or Down.



Be sure that the MSFS SDK ist INSTALLED !!!



Happy Flying

https://mega.nz/file/yYAGhCbR#2fRPJd8kB ... nfAYFUonbM

Thank you Sven for the tremendous effort and time you have injected in this project to provide this community of simmers with the possibility of connecting the superb FMGS to MSFS. I have tested it briefly (ground Only) to identify the operational modules. Could you please point out the ones still non functional to determine if we are doing the right thing.

Thank You.

[Scorpi1987]

its Here, we arrvied V 1.0b there many changes in it

NEW MSFS FLIGHTMODELL REWORKED based on Asobo A320-NEO

Engine Data improved to NEO Values (FCOM DATA comes with 1.2 or 1.3)

Improved FBW Data - (because i dont have currently the API, i cannot make it better)

ILS - LOC Working with the new Navaids

Smother Landing



Due the old FBW PERF .. somtimes it comes to an dive on OPT.Climb, thats an issue that i have in P3Dv4 too when
i press OPT Climb the Elevater makes a "Jump" to Full Up or Down.



Be sure that the MSFS SDK ist INSTALLED !!!



Happy Flying

https://mega.nz/file/yYAGhCbR#2fRPJd8kB ... nfAYFUonbM

Thank you Sven for the tremendous effort and time you have injected in this project to provide this community of simmers with the possibility of connecting the superb FMGS to MSFS. I have tested it briefly (ground Only) to identify the operational modules. Could you please point out the ones still non functional to determine if we are doing the right thing.

Thank You.

Hello Mike.
Thank you very much for the praise


The following modules are not working yet !

• - Lights
  - Radios
  - Sometimes auto-trim after touchdown.
  -If the engines do not start, switch FBW to CFM and then back to MSFS-CFM.

Some Workaarounds

Small workaround or lights:
Use Fsuipc and set the light switches directly to MSFS via FSUIPC.

For the radios, use the MSFS drivers or software from your manufacturer.

In my case SIOC if desired I can provide my profile for the Openockpits A320 RMP

For Skalarki users, use 'Skalarki Profiler with MSFS and Jeehell

For GND Power use the FMGS Config and bind a Button to it .

Currently iam Waitin for the API , that i can make a Own Connector with the WASM Simconnet VARS.

Greets

Sven

[Scorpi1987]

An when somebody has the feeling to help me contact me direct, or via my discord Linked above

Currently i need help for

Overworked FBW System
Adding the NEW A320neo FCOM N1% Ratings

[Scorpi1987]

After a long waiting time here come the NEW Version 2.0

Changelog:
• Improved Aero Dynamics
• Minor Changes in the Original FMGS Plane configs
• Improved TRIM ( no massive Trim ) TRIM SET TO "0" on Landing
• Old Lights Included
• Some Changes in MSFS Flightmodell
• ADDED LEAP Engines in FMGS
• Different Liverys can be Downloaded at my Discord https://discord.gg/fpbGNgw and you can ask a Request for Livery
Tiller now can works.. Edited UseP3DTiller to : no (in Aircraft.ini in the FMGS folder)

Please Delete CFM-MSFS on Perf folder its now useless

Make an Backup of your old CFM Folder.. the new settings doesnt work on P3D


https://mega.nz/file/rN4k1KhK#9_ruypJJt ... ryWdZjjS_E

[MikeN]

Hi,

Thank you Working perfectly. Downloaded couple of liveries but are not showing up.

[Scorpi1987]

Put these in Communiy folder too .. they must be in Folders otherwise contact me via Discord then i can help you

After Winrar/Zip put mainfolder to Community folder

[MikeN]

Thanks working.

[Scorpi1987]

I need an FMGS Expert to help me out

I have Problems to adapt the Fuel consumption

Contact me

[Scorpi1987]

Hey Folks v4.0 of my mod is out

Currently iam Testing the new Active Sky FS for MSFS, actually i dont have any radar..

@JL Active Sky for MSFS is Released.. testet it but it won´t work is it possible to add it

[Soarbywire]

Hey Folks v4.0 of my mod is out

Currently iam Testing the new Active Sky FS for MSFS, actually i dont have any radar..

@JL Active Sky for MSFS is Released.. testet it but it won´t work is it possible to add it

JL will most likely need to program native compatibility with Active Sky FS if there is a new API. Interestingly some people say they have got it to work with other avionics suite, which I doubt -

https://forums.hifisimtech.com/threads/ ... api.14818/

[Buford]

…
Interestingly some people say they have got it to work with other avionics suite, which I doubt -
…

Another one seems to read the wx.snapshot.txt only. Using the MSFS version of another one the weather radar is working even with P3D version of Active Sky running in background without connection to the sim. Of course in this case the display read from AS/P3D data did not match with the default MSFS weather.