Tiller Steering

[joao.fernandescmte]

Good evening, after the update I carried out two flights, I found the flight controls more sensitive, especially on final approach, I really liked it. but we have a problem, after landing, the Tiller Steering does not carry out the commands and becomes stuck. Another thing that happens at the same moment is that the plane seems to be still in the landing procedure requesting DN gear and sometimes stall, some bug

[gillesaqsim]

Yes i confirm, no auto brake decel, and tillers lost
Best regards
Gilles

[Soarbywire]

Hi, please file it in the Bugtracker so JL can address it.

[joao.fernandescmte]

To record that the Tiller Steering obeys the commands in the taxi for takeoff, after landing it no longer obeys, I inform you that I do not use the auto ruder, my Tiller is independent, just like the real one

[pete_fuss]

Hi JL,
in my case it is the same problem with the tiller and rudder

[balu69]

I have the same problem. but also at the takeoff. taxi is no problem.
go back to 60.0.4

[LH320]

Yes i confirm, no auto brake decel, and tillers lost
Best regards
Gilles

... the same here.

[jeehell]

A fix is coming soon

[jeehell]

Try to put the files in the zip file below into your FMGS Server\PERF folder:
https://www.jeehell.org/PERF.zip

[joao.fernandescmte]

Good evening, after replacing the folders I carried out a test and the Tiller Steering continues to be inactive after landing, remembering that in the taxi for take-off it works normally. Returning to the previous version works perfectly normally.

[masterp]

I replaced the PERF folder., but the tiller still has no effect.
For my case, in FSX taxi out for take off also has no NWS with tiller.

I noticed the following lines in aircraft.ini, are different between 60.0.5 and 61.3.7 (with new PERF above)

Code: Select all

APrudtrimSpeed=0.075
APrudtrimSpeed_SE_max=0.8
APrudtrimSpeed_SE_min=0.00001
APrudtrimSpeed_SE_BetaCutout=3
APrudtrimSpeed_BetaAcceptableError=0.5
APrudtrimSpeed_OutOfTrimAcceptableError=100.0

[gillesaqsim]

Hi JL,
after new 61.3.8, on my 2 pc home installation (not real size cockpit), AutoBRK is fine but always issus with landing tiller (and rudder).
i can send you files or informations if you want.
Gilles

[jeehell]

Gilles what p3d version do you use?

[SimStar]

I highly can confirm behavior. Autobrake works now but nosewheel steering.
I am using p3d V 5.3.17.28160 and si.connect 5.3.0.0

On previous version steering does work again after a New take off and a second landing. This does not work in latest version from today.

[gillesaqsim]

Jean Luc it's P3D v4. 5

[jeehell]

There seem to be an issue with P3D, after some it loses the steering function, my soft keep sending the data though.
I am reviewing what changes I made that could affect that, probably in sim connect.

[joao.fernandescmte]

Good evening, I just updated with the new version and now the parking brake when activated does not unlock the plane, I can't get out of place, it activates on the ecan but it does not obey the commands

[hamsterpilot]

I'm facing the same issue with the tiller. I have also P3D 5.3

[jeehell]

Just to be sure, even if it may not be the issue, are you doing autolands? if so are you disconnecting the AP before trying to use the tiller?

[hamsterpilot]

Disconnected the Autopilot with the sidestick switch and left A/THR engaged.
Was able to taxi the airbus with differential braking.

[jeehell]

rudder pedals do not work?( only the brakes?)

[jeehell]

please check in c:\A320FMGS\Aircraft\A320\aircraft.cfg that you have the line

Code: Select all

[contact_points]
inhibit_rudder_on_steer=1

[pe_martin]

Hello Jean-Luc!
I have the entry at the aircraft.cfg!
But the steering wheel does not work after landing.
Best regards
peter

[jeehell]

try to download https://www.jeehell.org/FMGS_Server.exe
it will output some logs I need in C:\A320FMGS\Logs\FMGSserverLog.txt post the file here (only one please)

[hamsterpilot]

I did a short flight with the downloaded FMGS_Server.exe. After landing the tiller didnt work, rudder was moving in F/CTL page, but steering was only working with differential braking.
Logfile is in the .zip archive because its too long for message and no .txt upload allowed
I hope it helps