Red/green effects on outside objects

Ask here for software oriented support
Post Reply
michael1508
Posts: 179
Joined: Fri Nov 04, 2022 4:07 pm
Location: EDDL

Red/green effects on outside objects

Post by michael1508 »

Hi Jean Luc, all,

I am experiencing some strange colour effects since updating to B57.
Objects to the left are getting a red tone, while objects to the right are getting a green tone. Center view is ok.

You would think, that this has something to do with the graphics card or P3D, but the funny thing is, it only appears with FMGS running!

See attached pictures, parking in front of a hangar, where the effect comes out pretty well.
Lower pic with engines running. Upper one after turning engines and power off (normal again).

Any idea?
You do not have the required permissions to view the files attached to this post.
Regards
Michael

P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
jeehell
Site Admin
Posts: 414
Joined: Thu Nov 03, 2022 10:14 am

Re: Red/green effects on outside objects

Post by jeehell »

those are the nav lights reflecting on the building, I need to work a bit on the light effects to avoid those.
Regards,
Jean Luc
User avatar
MikeN
Posts: 7
Joined: Fri Nov 04, 2022 7:17 am

Re: Red/green effects on outside objects

Post by MikeN »

I had the same problem but someone posted a solution a while ago which is , if I remeber correctly, go to a320fmgs/aircraft/effects and open the fx navred and fx navgreen in notepad then lower the xscale where the number 600 appears to number 2 . You can tweak the value according to your liking.
Regards
Mike
michael1508
Posts: 179
Joined: Fri Nov 04, 2022 4:07 pm
Location: EDDL

Re: Red/green effects on outside objects

Post by michael1508 »

jeehell wrote: Sun Nov 13, 2022 11:10 pm those are the nav lights reflecting on the building, I need to work a bit on the light effects to avoid those.
ah ok, indeed a bit too strong light effect 😉

I will try to adjust the light effect according to the post from Mike. Or deactivate the new ext lights.

I remember, i had to create a file like “old ext lights.txt” or so.
Can you please share again the how to?

Thanks
Regards
Michael

P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
jeehell
Site Admin
Posts: 414
Joined: Thu Nov 03, 2022 10:14 am

Re: Red/green effects on outside objects

Post by jeehell »

Regards,
Jean Luc
balu69
Posts: 113
Joined: Thu Nov 03, 2022 4:15 pm

Re: Red/green effects on outside objects

Post by balu69 »

Hi
you can find my customized fx files here
https://alinga.ch/ExteriorLights.zip
Greetings
Stephan

P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
michael1508
Posts: 179
Joined: Fri Nov 04, 2022 4:07 pm
Location: EDDL

Re: Red/green effects on outside objects

Post by michael1508 »

balu69 wrote: Mon Nov 14, 2022 4:09 pm Hi
you can find my customized fx files here
https://alinga.ch/ExteriorLights.zip
Excellent - Thanks a lot!!!

Did you also rework the other lights (i.e. landing light)?
Regards
Michael

P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
balu69
Posts: 113
Joined: Thu Nov 03, 2022 4:15 pm

Re: Red/green effects on outside objects

Post by balu69 »

yes, i adjusted all lights. I also set the lights not to illuminate the area during the day (Intensity Day=0). I think these are more realistic that way.
Greetings
Stephan

P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
bbruechmann
Posts: 133
Joined: Thu Nov 03, 2022 9:24 pm

Re: Red/green effects on outside objects

Post by bbruechmann »

balu69 and michael1508: don´t you experience any stutters at the take off role while on the runway with the new lights activated?
Regards
Bernd

P3D 6, I9-9900K overcl+ RTX3090 24GB, Skalarki Homecockpit + JH FMGS on a dedicated Server, AS/ASCA, EnVShade +Tex, PF3 + MCE, CorteManager + ExtPWR from CaptPERO, AIGAIM and many of add-on sceneries
balu69
Posts: 113
Joined: Thu Nov 03, 2022 4:15 pm

Re: Red/green effects on outside objects

Post by balu69 »

hi bernd
no, I don't notice any stutters (by day). But would have to test at night and in bad weather. get in touch
Greetings
Stephan

P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
michael1508
Posts: 179
Joined: Fri Nov 04, 2022 4:07 pm
Location: EDDL

Re: Red/green effects on outside objects

Post by michael1508 »

Hi Bernd,

I experience the less stutters, the lower the light intensity.
Taking the light files from balu69 as basis, I even lowered intensity of Landing lights to 10 at night / 6 at day.
So I still have some light effects during morning or early evening hours.
FPS during day is ok. At nights still hitting a bit, but not as bad as the default lights, which are anyway much too bright
Regards
Michael

P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
User avatar
Buford
Posts: 63
Joined: Fri Nov 04, 2022 8:11 am

Re: Red/green effects on outside objects

Post by Buford »

The link to the files does not work any longer, could someone give me access to the files or could you, Stephan, make them available again - THX in advance!
See you in the skies…
balu69
Posts: 113
Joined: Thu Nov 03, 2022 4:15 pm

Re: Red/green effects on outside objects

Post by balu69 »

Sorry, it is available again.
Greetings
Stephan

P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Post Reply