pero | EXT PWR by GSX

The place to discuss all third party applications working with/along JeeHell FMGS
bbruechmann
Posts: 130
Joined: Thu Nov 03, 2022 9:24 pm

Re: pero | EXT PWR by GSX

Post by bbruechmann »

pe_martin wrote: Fri Feb 03, 2023 9:41 am Hello!
Ok the loop is gone but the script does not start!
Best regards
Peter
Even not, if you open the GSX Menue manually once? (STRG-W) I had that from time to time too, but if i call the GSX menue, the script then starts it´s actions usually.
Regards
Bernd

P3D 6, I9-9900K overcl+ RTX3090 24GB, Skalarki Homecockpit + JH FMGS on a dedicated Server, AS/ASCA, EnVShade +Tex, PF3 + MCE, CorteManager + ExtPWR from CaptPERO, AIGAIM and many of add-on sceneries
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

Re: pero | EXT PWR by GSX

Post by Capt. PERO »

bbruechmann wrote: Fri Feb 03, 2023 10:14 am Just for heads-up:
As i took notice while testing, the new feature of re-positioning seems to require a correct set up of the GSX position profile or you could end up in a weird postion. The way GSX works, if no customized Profile can be found for an Airport, is that the initial postions are created from the AFCAD provided by the scenery developer. These are sometimes not very correct as it´s the case in EDDF. GSX creates start positions based on the AFCAD and i end up with the nose in the Terminal after re-position. This would mean i have to define the GSX Stop position manually for all Parkings, or i take a well done profile from someone else.
Would it be an idea, to add switch in the configtool that reposition can be deactivated?
Good point. I will add this.
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

pero | EXT PWR by GSX v9.20.08

Post by Capt. PERO »

v9.20.08 03.02.2023
Configuration Tool updated - Please open and Save your configuration again!

[FEATURE] "Repositon Aircraft" can be disabled in ConfigTool. Default = On.
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

pero | EXT PWR by GSX v9.21.08

Post by Capt. PERO »

New Update available on my website.

v9.21.08 19.02.2023
[CHANGED] External Power waits for GPU if AC is on Parking Position without Jetway
[BUGFIX] Jetways not docking in some circumstances
[BUGFIX] HANDLING OPERATOR not selected by "GSX CHOICE" in some circumstances
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

pero | EXT PWR by GSX (Fixed view of Landing Rate Monitor)

Post by Capt. PERO »

The "Landing Rate Monitor" was not showing all flights doe to "DateTime" issues of the import data. This is fixed with this new file. I will soon update the download on my website.

Thanks to Thierry for Debugging and Testing!


peroJeeHellExtPWRbyGSX.zip
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
pe_martin
Posts: 80
Joined: Thu Nov 03, 2022 4:41 pm

Re: pero | EXT PWR by GSX

Post by pe_martin »

Hello Peter!
Can it be possible that you zip-file is demaged?
Please check it.
Best regards
peter
----------------------------------------------
D-AIPB
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

Re: pero | EXT PWR by GSX

Post by Capt. PERO »

Download can be found on my website now.
https://aviation.pero-online.de/wordpress/?page_id=1937
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
D-AJMF
Posts: 13
Joined: Mon Nov 07, 2022 10:02 pm

Re: pero | EXT PWR by GSX

Post by D-AJMF »

Hello,

I installed your script to be used with Chris CPDLC software.
But I run Jeehell server and P3d V5 on different computers but with registered FSUIPC and WIDEFS.

Its not possible to control it via the MCDU, I guess the issue is the keyboard emulation, as the PCs are different?

Kind regards
Michael
D-AJMF
Posts: 13
Joined: Mon Nov 07, 2022 10:02 pm

Re: pero | EXT PWR by GSX

Post by D-AJMF »

D-AJMF wrote: Wed May 03, 2023 10:52 pm Hello,

I installed your script to be used with Chris CPDLC software.
But I run Jeehell server and P3d V5 on different computers but with registered FSUIPC and WIDEFS.

Its not possible to control it via the MCDU, I guess the issue is the keyboard emulation, as the PCs are different?

Kind regards
Michael
It finally works! There was just a mistake by copy/paste in the config🙄.

But another question, I got the issue that I can’t see all options from the GSX Menu, I need to scroll. But don’t have a mouse to do so.
Do you think it might be possible to add a scrolling feature or something like that?
Maybe there is already something like that, but I’m blind.

Kind regards
Michael
bbruechmann
Posts: 130
Joined: Thu Nov 03, 2022 9:24 pm

Re: pero | EXT PWR by GSX

Post by bbruechmann »

Hallo Peter,
ich benutze jetzt nur noch die V6 in bin noch am Finetuning. Für mich ist allein schon die jetzt realistische Darstellung des Tag/Nacht-Wechsels Grund genug, weil mich das schon immer im P3D gestört hat. Performancemäßig läuft die V6 bei mir auch genauso super wie die 5.4.
ABER: Es scheint ein klitzekleines Problem mit ExtPwr zu geben. Das Script ist nicht in der Lage das GSX-Menu zu starten (STRG-W). Ansonsten läuft alles scheinbar normal. Die Automation der GSX-services geht aber eben nicht automatisch, was aus meiner Sicht nur daran liegt das STRG-W nicht läuft, denn wenn ich das manuell aufrufe macht das Script automatisch den Rest, bis ein erneutes STRG-W nötig wäre.
Ich vermute, dass da wieder irgendwas in der FSUIPC für die V6 was blockiert.
Es wäre toll, wenn Du Dir das mal ansehen könntest.
Regards
Bernd

P3D 6, I9-9900K overcl+ RTX3090 24GB, Skalarki Homecockpit + JH FMGS on a dedicated Server, AS/ASCA, EnVShade +Tex, PF3 + MCE, CorteManager + ExtPWR from CaptPERO, AIGAIM and many of add-on sceneries
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

Re: pero | EXT PWR by GSX

Post by Capt. PERO »

Hallo Bernd,

ich habe v6 leider nicht auf der Platte und kann daher auch nix testen.
Versuche mal diesen Eintrag in der FSUIPC.ini zu setzen:

https://aviation.pero-online.de/wordpre ... c-6-0-1-0/
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
pe_martin
Posts: 80
Joined: Thu Nov 03, 2022 4:41 pm

Re: pero | EXT PWR by GSX

Post by pe_martin »

Hallo Peter!
Bekomme mit V6 den Fehler beim Check ipcReady.lua

Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.

************** Ausnahmetext **************
System.ArgumentException: Diese Liste kann nicht gelöscht werden.
bei System.Data.DataView.System.Collections.IList.Clear()
bei System.Windows.Forms.DataGridViewRowCollection.Clear()
bei peroJeeHellExtPWRbyGSX.main_F.fill_LandingMonitor()
bei peroJeeHellExtPWRbyGSX.main_F.load_form()
bei peroJeeHellExtPWRbyGSX.main_F.Button1_Click(Object sender, EventArgs e)
bei System.Windows.Forms.Control.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ButtonBase.WndProc(Message& m)
bei System.Windows.Forms.Button.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


Haste ne Idee was das sein könnte?
Gruss Peter
----------------------------------------------
D-AIPB
bbruechmann
Posts: 130
Joined: Thu Nov 03, 2022 9:24 pm

Re: pero | EXT PWR by GSX

Post by bbruechmann »

Capt. PERO wrote: Mon Aug 14, 2023 6:45 pm Hallo Bernd,

ich habe v6 leider nicht auf der Platte und kann daher auch nix testen.
Versuche mal diesen Eintrag in der FSUIPC.ini zu setzen:

https://aviation.pero-online.de/wordpre ... c-6-0-1-0/
Hallo Peter,

das hat funktioniert! Soweit ich das beurteilen kann läufts auch unter V6 normal.

Danke!
Regards
Bernd

P3D 6, I9-9900K overcl+ RTX3090 24GB, Skalarki Homecockpit + JH FMGS on a dedicated Server, AS/ASCA, EnVShade +Tex, PF3 + MCE, CorteManager + ExtPWR from CaptPERO, AIGAIM and many of add-on sceneries
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

Re: pero | EXT PWR by GSX

Post by Capt. PERO »

bbruechmann wrote: Wed Aug 16, 2023 11:51 am [...]das hat funktioniert! Soweit ich das beurteilen kann läufts auch unter V6 normal.
Danke!
Gerne. Freut mich. :-)
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

Re: pero | EXT PWR by GSX

Post by Capt. PERO »

pe_martin wrote: Tue Aug 15, 2023 6:45 pm Hallo Peter!
Bekomme mit V6 den Fehler beim Check ipcReady.lua

Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.

************** Ausnahmetext **************
System.ArgumentException: Diese Liste kann nicht gelöscht werden.
bei System.Data.DataView.System.Collections.IList.Clear()
bei System.Windows.Forms.DataGridViewRowCollection.Clear()
bei peroJeeHellExtPWRbyGSX.main_F.fill_LandingMonitor()
bei peroJeeHellExtPWRbyGSX.main_F.load_form()
bei peroJeeHellExtPWRbyGSX.main_F.Button1_Click(Object sender, EventArgs e)
bei System.Windows.Forms.Control.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnClick(EventArgs e)
bei System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ButtonBase.WndProc(Message& m)
bei System.Windows.Forms.Button.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


Haste ne Idee was das sein könnte?
Gruss Peter
Hallo Peter,

mir ist nicht ganz klar, wie der Fehler mit der ipcReady.lua zusammen hängt. Das LUA Script ließt Daten aus den durch den Manager erzeugten Configdaten oder schriebt Daten für das Logbook. Wenn das Script nicht startet, dann müsste man das in der FUSIPCx.log sehen. Bei Dir scheint aber mein Manager nicht zu starten.

Ggf. liegt das an korupten Daten in einer der beiden Dateien:
peroJeeHellExtPWRbyGSX_config.lua
peroJeeHellExtPWRbyGSX_LandingMonitorLog.txt

Würde mal probieren diese nacheinander zu deaktiveren, den Manager zu starten, speichern um die *config.lua zu anzulegen.
Die *LandingMonitorLog.txt kannst Du mal leeren (vorher sichern) um zu schauen wo das Problem her kommt.

Wie schon oben geschrieben, habe ich v6 nicht im Einsatz (und plane den Einsatz gerade auch nicht). Hoffe, ich kann so weiterhelfen.
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

pero | EXT PWR by GSX v9.23.11 out now!

Post by Capt. PERO »

Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
User avatar
thierryd
Posts: 75
Joined: Wed Nov 30, 2022 8:32 pm
Contact:

Re: pero | EXT PWR by GSX

Post by thierryd »

Thanks for the update!
Thierry (aka Captain Tango) | Website: https://www.flightpathsimulation.club | YouTube: https://www.youtube.com/@captaintango
Barrykensett
Posts: 25
Joined: Mon Nov 14, 2022 11:08 pm

Re: pero | EXT PWR by GSX

Post by Barrykensett »

I have been using EXT PWR for a long time and thank you for providing it.
I have recently upgraded to P3D v6 which is working but GSX is not, having been successful for a long time I think I kmia how to do it.
I am attracted by the note in the read me “ We found out that the latest version of FSUIPC5 (5.157) does not work with my script. Latest known working version is FSUIPC6 or FSUIPC 5.155” I loaded the latest version of FSUIPC when I reloaded so this may be the reason behind my problem, Before I roll back to an earlier version of FSUIIC can you confirm that thus warning is still current and is there any plan to update to avoid the problems?
Barry Kensett
Barrykensett
Posts: 25
Joined: Mon Nov 14, 2022 11:08 pm

Re: pero | EXT PWR by GSX

Post by Barrykensett »

Sorry misprint above, GSX is working, it is EXT PWR that is not.
Barry
User avatar
Capt. PERO
Posts: 97
Joined: Fri Nov 04, 2022 3:23 am
Location: Germany
Contact:

Re: pero | EXT PWR by GSX

Post by Capt. PERO »

Barrykensett wrote: Sat Feb 03, 2024 7:05 pm Sorry misprint above, GSX is working, it is EXT PWR that is not.
Barry
Can you send details what's not working?
Viele Grüße / with best regards,
Peter

: : : aviation.pero-online.de
Developer of SIMstarter NG P3D & Homecockpit Builder
Post Reply