I planned a flight from Bilbao to Madeira and loaded it into the MCDU via Simbrief.
The route is: LEBB/12 N0447F370 AMTO4D AMTOS UL14 ADINO DCT ESP DCT GANSU DCT NARTA DCT RAKUN RAKU1P LPMA/05
The whole route is approximately 950NM. Actually the route goes almost straight except for SID and STAR.
In the MCDU, however, the waypoints for GANSU and NARTA are not correct. Both waypoints exist twice. GANSU is incorrectly selected, it is 4850 NM from the route. The error occurs from the Waypoint ESP. I have checked the data from Simbrief. GANSU is transmitted with the correct LAT / LON values.
And the letters at the waypoints look like they are always two on top of each other. If you replace the incorrect waypoints with the correct ones, everything will be displayed correctly.
Imported flight plan from Simbrief sometimes incorrect.
-
- Posts: 177
- Joined: Thu Dec 15, 2022 11:11 am
- Location: Germany \ near EDDL
- Contact:
Imported flight plan from Simbrief sometimes incorrect.
Regards
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
Re: Imported flight plan from Simbrief sometimes incorrect.
can you share the raw corte.xml file from simbrief?
You do not have the required permissions to view the files attached to this post.
Regards,
Jean Luc
Jean Luc
-
- Posts: 177
- Joined: Thu Dec 15, 2022 11:11 am
- Location: Germany \ near EDDL
- Contact:
Re: Imported flight plan from Simbrief sometimes incorrect.
Hi Jean Luc,
yes, I can do that, I'll see if I can get around to it this weekend.
Thanks.
yes, I can do that, I'll see if I can get around to it this weekend.
Thanks.
Regards
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
-
- Posts: 177
- Joined: Thu Dec 15, 2022 11:11 am
- Location: Germany \ near EDDL
- Contact:
Re: Imported flight plan from Simbrief sometimes incorrect.
Hi Jean Luc,
this is the corte.xml for this flight:
<CORTEs>
<CORTE ID="BIOFNC01" TYPE="CORTE" FROM="LEBB" TO="LPMA" FLTNBR="DLH281" CI="30" CRZFL="230">
<DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE"/>
<LEG SEQ="0" TYPE="DIR" WPT="AMTOS"/>
<LEG SEQ="1" TYPE="AWY" ID="R75" WPT="NEA"/>
<LEG SEQ="2" TYPE="AWY" ID="UL14" WPT="ADINO"/>
<LEG SEQ="3" TYPE="DIR" WPT="ESP"/>
<LEG SEQ="4" TYPE="DIR" WPT="GANSU"/>
<LEG SEQ="5" TYPE="DIR" WPT="NARTA"/>
<LEG SEQ="6" TYPE="DIR" WPT="RAKUN"/>
<ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE"/>
<ALTN ICAO="NONE" ID="NONE"/>
</CORTE>
</CORTEs>
this is the corte.xml for this flight:
<CORTEs>
<CORTE ID="BIOFNC01" TYPE="CORTE" FROM="LEBB" TO="LPMA" FLTNBR="DLH281" CI="30" CRZFL="230">
<DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE"/>
<LEG SEQ="0" TYPE="DIR" WPT="AMTOS"/>
<LEG SEQ="1" TYPE="AWY" ID="R75" WPT="NEA"/>
<LEG SEQ="2" TYPE="AWY" ID="UL14" WPT="ADINO"/>
<LEG SEQ="3" TYPE="DIR" WPT="ESP"/>
<LEG SEQ="4" TYPE="DIR" WPT="GANSU"/>
<LEG SEQ="5" TYPE="DIR" WPT="NARTA"/>
<LEG SEQ="6" TYPE="DIR" WPT="RAKUN"/>
<ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE"/>
<ALTN ICAO="NONE" ID="NONE"/>
</CORTE>
</CORTEs>
Regards
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
-
- Posts: 177
- Joined: Thu Dec 15, 2022 11:11 am
- Location: Germany \ near EDDL
- Contact:
Re: Imported flight plan from Simbrief sometimes incorrect.
Today I took a flight from LPMA to GCFV. The same error, a waypoint (GDV) is chosen incorrectly.
GOSG1W GOSGA ORTIS UN728 BRICK GDV GDV5S
CORTE ID="FNCFUE01" TYPE="CORTE" FROM="LPMA" TO="GCFV" FLTNBR="DLH281" CI="50" CRZFL="390">
<DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE"/>
<LEG SEQ="0" TYPE="DIR" WPT="GOSGA"/>
<LEG SEQ="1" TYPE="DIR" WPT="ORTIS"/>
<LEG SEQ="2" TYPE="AWY" ID="UN728" WPT="BRICK"/>
<LEG SEQ="3" TYPE="DIR" WPT="GDV"/>
<ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE"/>
<ALTN ICAO="NONE" ID="NONE"/>
</CORTE>
GOSG1W GOSGA ORTIS UN728 BRICK GDV GDV5S
CORTE ID="FNCFUE01" TYPE="CORTE" FROM="LPMA" TO="GCFV" FLTNBR="DLH281" CI="50" CRZFL="390">
<DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE"/>
<LEG SEQ="0" TYPE="DIR" WPT="GOSGA"/>
<LEG SEQ="1" TYPE="DIR" WPT="ORTIS"/>
<LEG SEQ="2" TYPE="AWY" ID="UN728" WPT="BRICK"/>
<LEG SEQ="3" TYPE="DIR" WPT="GDV"/>
<ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE"/>
<ALTN ICAO="NONE" ID="NONE"/>
</CORTE>
Regards
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder
Dieter
A320 cockpit Prepar3d v5.4 with full voice control for ATC and ground crew
Developer of EWD Overlay and Home Cockpit Builder