Touche tail!

Ask here for software oriented support
Post Reply
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Touche tail!

Post by Rafape »

Hello.

Lately I have to add +20 knots to the landing speed because it always touches the tail. Have I touched something I shouldn't?

Thank's
Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

You may have an issue with simpatcher
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

I'll check to see what happened.

Thank you very much J.L.
Rafa Pedrero
Prepar 3D V3.4
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

Hello Jean-Luc.

I have reviewed this topic viewtopic.php?p=214&hilit=SimPatcher.dll#p214

From what I see, neither SimPatcher.dll loads nor does air File appear in the P3D V3.4 Menu

In the DLL.XML file I have:

<Launch.Addon>
<Name>SIMpatcherModule</Name>
<Path>c:\A320FMGS\SimPatch\Simpatcher.dll</Path>
</Launch.Addon>

I added in the add-ons.xml to test:
<AddOn.Component>
<Name>SIMpatcherModule</Name>
<Category>DLL</Category>
<Path>c:\A320FMGS\SimPatch\Simpatcher.dll</Path>
</AddOn.Component>

simpatchlog.txt:

18:31:33 Module Start B58.0
18:31:33 WXR data output path:C:\A320FMGS\WXR\
18:31:33 SimConnect_Open OK
18:31:34 friction file:c:\A320FMGS\SimPatch\frictionPoints.ini
18:31:34 Friction Hack OK
18:31:34 sim1:3.4.22.19868
18:31:34 XwindOffset file exists:c:\A320FMGS\SimPatch\XwindOffset.ini
18:31:34 10.0.61472.0=$11110
18:31:34 2.5.12945.0=$111BA8
18:31:34 3.4.9.18400=$125778
18:31:34 4.5.11.29713=$1526A8
18:31:34 4.5.14.34698=$154AB8
18:31:34 5.1.8.26742=$1577E0
18:31:34 5.1.12.26829=$1577E0
18:31:34 5.2.18.27565=$157870
18:31:34 5.2.22.27615=$157880
18:31:34 5.3.12.28072=$157878
18:31:34 5.3.15.28131=$157878
18:31:34 5.3.17.28160=$157878
18:31:34 PreFoundXWINDoffset:0
18:31:34 XWIND Hack OK 7 times
18:31:34 XWIND Hack not preset for this version of P3D, not using the XWIND hack!
18:31:34 DllStart OK

I can't think of any more ideas.

Image
Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

in c:\A320FMGS\Simpatch you should have a file called simpatchConfig.ini.
Open it up with notepad and inside you should have:
[config]
sleepTime=120000
Try to increase sleep time to 180000
Are you sure you installed P3D V3.4 option at installation?
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

Hola Jean Luc.

Whenever your program is updated by default, version 3.4 is selected for me, but I always check it.

In the simpatchConfig.ini file the value it had is 50000 from 11/8/2022. I am going to change to 180000 and I will tell you, to see if that has been the problem.

At the moment, having changed that data, now Simpatcher B58.0 and Air File OK appear.

Tomorrow I will continue testing, but it has been putting flap 1 both on the ground and in the air, and it has made me spin around the longitudinal axis like crazy.

Millions of thanks for your work ;)
Rafa Pedrero
Prepar 3D V3.4
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

Hi Jean Luc.

After all the cockpit preparation, everything was perfect until I put Flap 1 and this always happens to me. Why could it be happening? Yesterday it did not do it to me on the ground, but on approach.

Thank you!

Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

Did you install from scratch?
Did you port any files from an older installation?
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

No. I only modified the simpatchConfig.ini.
Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

You did not reply to both questions.
And clearly you used a modded aircraft since it has a livery not included in my package...
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

Jean-Luc. Does installing from scratch mean uninstall everything, reboot and reinstall? I haven't done that, maybe it's for the best.

Regarding the livery, I have been using it for several years, they are only bmp files. I don't think it will affect it, but I'll remove it anyway!

I have done more tests, and in the last one for some reason the Air File loaded did not appear in Add-ons, and it has not failed me.

Anyway I uninstall everything and start from scratch.

Thank you so much!
Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

are you sure you copied only textures files? could you have overwritten the air file or cfg file?
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

From what I see, they are just textures. Oh well...

And I only modify the C:\A320FMGS\Aircraft\A320\Aircraft.cfg indicating what texture it is. The rest do not touch anything from any file

Thank you!

Image
Rafa Pedrero
Prepar 3D V3.4
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

After uninstalling everything, including P3D v3.4, FMGS and all add-ons, I've done a clean install again, without touching anything. After a day wondering why the P3D would restart, but it would disappear from the screen, I removed this from the dll.xml file:

<Launch.Addon>
<Name>SIMpatcherModule</Name>
<Path>c:\A320FMGS\SimPatch\Simpatcher.dll</Path>
</Launch.Addon>

The simulator starts perfectly. I'll keep investigating, but I think that Simpatcher doesn't like it!
Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

If you remove simpatcher, you will get issues with aerodynamics.
Try again the fixe from here and re-enable simpatcher.
jeehell wrote: Tue May 16, 2023 8:28 pm in c:\A320FMGS\Simpatch you should have a file called simpatchConfig.ini.
Open it up with notepad and inside you should have:
[config]
sleepTime=120000
Try to increase sleep time to 180000
Are you sure you installed P3D V3.4 option at installation?
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

Clean installation of both P3d V3.4 and FMGS 58.0.4.

No add-ons installed. All factory:

Rafa Pedrero
Prepar 3D V3.4
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

read my last message.
Regards,
Jean Luc
Rafape
Posts: 19
Joined: Fri Feb 10, 2023 6:43 pm

Re: Touche tail!

Post by Rafape »

Yes.

SleepTime=180000 and installer V3.4
Rafa Pedrero
Prepar 3D V3.4
masterp
Posts: 11
Joined: Fri Nov 04, 2022 4:20 am

Re: Touche tail!

Post by masterp »

@Jean Luc, may be the version of simconnect is not matched the available version in the XwindOffset.ini file ?
Xwind hack not preset, then simpatcher can not be loaded to the old simulator?

Just my guess because I am having the similar issue with new Simpatcher and FSX Acceleration (currently using simconnect version 10.0.61637.0). my Simpatcher log file similar to Rafape:

The log file stopped with "DllStart OK" no more message, and Simpatcher/ AIR file never shown up on Simulator's menu (FSX\Modules) (P3D/Addons)

"18:31:33 Module Start B58.2
18:31:33 WXR data output path:C:\A320FMGS\WXR\
18:31:33 SimConnect_Open OK
18:31:34 friction file:c:\A320FMGS\SimPatch\frictionPoints.ini
18:31:34 Friction Hack OK
18:31:34 sim1:10.0.61637.0
18:31:34 XwindOffset file exists:c:\A320FMGS\SimPatch\XwindOffset.ini
18:31:34 10.0.61472.0=$11110
18:31:34 2.5.12945.0=$111BA8
18:31:34 3.4.9.18400=$125778
18:31:34 4.5.11.29713=$1526A8
18:31:34 4.5.14.34698=$154AB8
18:31:34 5.1.8.26742=$1577E0
18:31:34 5.1.12.26829=$1577E0
18:31:34 5.2.18.27565=$157870
18:31:34 5.2.22.27615=$157880
18:31:34 5.3.12.28072=$157878
18:31:34 5.3.15.28131=$157878
18:31:34 5.3.17.28160=$157878
18:31:34 PreFoundXWINDoffset:0
18:31:34 XWIND Hack OK 7 times
18:31:34 XWIND Hack not preset for this version of P3D, not using the XWIND hack!
18:31:34 DllStart OK"
Thanks,
Phuong Vu
User avatar
Soarbywire
Posts: 25
Joined: Fri Nov 04, 2022 12:23 am
Location: Sydney, Australia
Contact:

Re: Touche tail!

Post by Soarbywire »

masterp wrote: Thu Sep 07, 2023 8:11 am @Jean Luc, may be the version of simconnect is not matched the available version in the XwindOffset.ini file ?
Xwind hack not preset, then simpatcher can not be loaded to the old simulator?


Interestingly Simpatcher did not install into the A320FMGS\Simpatch folder with a clean 59.1 install.

I am also unable to see it in the Prepard3D v5.3 menu.
jeehell
Site Admin
Posts: 312
Joined: Thu Nov 03, 2022 10:14 am

Re: Touche tail!

Post by jeehell »

You did select the P3D PC option at install?
Regards,
Jean Luc
User avatar
Soarbywire
Posts: 25
Joined: Fri Nov 04, 2022 12:23 am
Location: Sydney, Australia
Contact:

Re: Touche tail!

Post by Soarbywire »

Ah - Master PC option was not selected. Thank you. Need to get my eyes check, desktop resolution is set to 4K and text is extremely small :)
Post Reply