3 Pc Setup

Share your experience with computer/networking setup here.
Post Reply
SwissFlyer
Posts: 3
Joined: Mon May 03, 2021 2:16 pm

3 Pc Setup

Post by SwissFlyer »

Hello together,
My wished Setup is:
1. Pc =FSP3Dv4.5/ MCDU Screen/ Hardware fscockpit Autobreakpanel Overhead, cpflight FCUA320,
2. Pc =Fmgs Server , AP/FBW , fscockpit Sidestick , Rudder/Pedal , because of Throttle also Hardwareconnect,
PFD Nd( hopefully with weatherradar)
3.Pc= Only EICAS Screen( slowest Pc)

Now I have a big problem!
Server does not connect to P3D-Pc

All 3 WidefmgsLog says: Port 8003: connected
Port 8003: disconnected
TfmapsThread timeout……or fmaps error 10053
Etc.
Norton is running, but all programs have adminrights and are allowed!
Has anyone an idea, what should be the problem?
I would be very happy for some help

SwissFlyer
Posts: 3
Joined: Mon May 03, 2021 2:16 pm

Re: 3 Pc Setup

Post by SwissFlyer »

Hello, it’s me again.
Could it be a problem, because I use the same Microsoft Account on Pc1 and Pc2?
I kicked off Norton.
But I have still no connection from FMGS Server to P3dv4.
If anyone could help, I would be very happy.
I need the server on Pc2 because I want the weatherradar on ND(Nd Display is at the second Pc/I have no place on Pc1 for a third screen!)

buentead
Posts: 35
Joined: Fri Jun 19, 2020 4:52 pm

Re: 3 Pc Setup

Post by buentead »

The same Microsoft Account on all PC's is OK. I'm also using this set up.

Does the communication between the PC work now?

SwissFlyer
Posts: 3
Joined: Mon May 03, 2021 2:16 pm

Re: 3 Pc Setup

Post by SwissFlyer »

Yes! Finally, but I had to change FmgsServer back to P3D Pc and also all the Hardware🙄. Finally I’m happy that I have now Weatherradar / EGPWS on the ND Display!

buentead
Posts: 35
Joined: Fri Jun 19, 2020 4:52 pm

Re: 3 Pc Setup

Post by buentead »

Cool, thanks for the update :-) Happy flying!

Post Reply