Thrust osziallation, no "V1" CallOut and new Modell too light?

Ask here for software oriented support
Post Reply
spaceweather
Posts: 7
Joined: Tue Nov 08, 2022 1:00 pm

Thrust osziallation, no "V1" CallOut and new Modell too light?

Post by spaceweather »

Hi all,

and Jeehell many thanks for your steady great work into that fine Software!
I am comming from 55th version and in the days between the Years i did the Update to the actual version.
Good to see, that some features came up and TOC/TOD is now displayed. But the well known Circles and patterns on the ND along the route are still there :lol:

Now my new problems:

1.
The performance of the engines fluctuates during the flight. The thrust isn`t stable anymore. 1st i thought it comes from strange winds, but after deactivating Actice Sky and using "Clear Sks" the effect remained.
2.
The callout of "V1" before takeoff on runway is not output. Others are fine.
3.
Is it correct, that the weight of the new Aircraft Model is only arround 33t?? In the 1st testflight i had the effekt, that my climbrate was arround 7000 and the aircraft lifted his nose at takeoff without any stick inputs. I do my loading routine via Simbrief and then export the data.

Regards
Andy
spaceweather
Posts: 7
Joined: Tue Nov 08, 2022 1:00 pm

Re: Thrust osziallation, no "V1" CallOut and new Modell too light?

Post by spaceweather »

Found out for No2. the answere myself: it is not longer supported.
spaceweather
Posts: 7
Joined: Tue Nov 08, 2022 1:00 pm

Re: Thrust osziallation, no "V1" CallOut and new Modell too light?

Post by spaceweather »

Nobody for 1. & 3. ?

Regards Andy
gillesaqsim
Posts: 59
Joined: Fri Nov 04, 2022 5:36 pm

Re: Thrust osziallation, no "V1" CallOut and new Modell too light?

Post by gillesaqsim »

hello,
sorry,not as far as I'm concerned.
because you are coming from a very very old version, perhaps you should do a clean installation.
and redo a calibration.
be careful the contents of the plane folder have changed and many other things.
best regards
Gilles
balu69
Posts: 86
Joined: Thu Nov 03, 2022 4:15 pm

Re: Thrust osziallation, no "V1" CallOut and new Modell too light?

Post by balu69 »

hello
Jean Luc removed this in an update. As far as I know, because this callout doesn't come from the plane
viewtopic.php?t=10
Greetings
Stephan

P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Post Reply