JeeHell FMGS forums

Make sure that the old ADIRS type is selected in aircraft options. Sometimes resets after updates.

You did it! The tiller works again! Thank you for your efforts

I have everything on the same Computer wich is running P3D. Only exceptions are the PFD/ND and ECAM displays which are running on a separate PC

I flew a round now, can confirm in both aircraft.ini useP3Dtiller=yes. Again the tiller didn’t work after landing and when closing Jeehell the flight model instantly retracted the landing gear. Also the “Rudder to Tiller Position binding” in the aircraft options can’t be selected to yes, the dropdow...

A few days I noticed when I closed Jeehell before P3D after having the tiller issue, the flightmodel directly retracted the landing gear. It didnt do that before. Maybe this helps to pin point the problem.

The Logs I provided contains one before take off where tiller was working and one after landing where it wasn't. I hope that helps him to find the problem.

Here you go. I made mutliple saves just in case. The tryingToTaxiWithTiller log might be the interesting one

I will fly another round. Just to be sure, saving means closing Jeehell FMGS right?

Yeah I uploaded the log after closing the simulator. So I just let it running, taxi a bit and then upload it bevor closing jeehell and p3d?

I did a short flight with the downloaded FMGS_Server.exe. After landing the tiller didnt work, rudder was moving in F/CTL page, but steering was only working with differential braking.
Logfile is in the .zip archive because its too long for message and no .txt upload allowed
I hope it helps

Disconnected the Autopilot with the sidestick switch and left A/THR engaged.
Was able to taxi the airbus with differential braking.

I'm facing the same issue with the tiller. I have also P3D 5.3

Great Job! Looking forward to try this the next days. I really like the lighting/graphics of MSFS and this is game changing for me.
But still, official native MSFS support will be a day to celebrate haha .

Apart from the calls, could you provide us the offsets for the missing lights?

OXYGEN PASSENGER SYS ON
GEN 1 LINE SMOKE

Edit:
All CALL buttons work now and are playing the Gong. The Action IDs mentioned above are correct. Make sure to assign them as push and release Event

The Gong Sound playing in the background. When using the Software overhead panel the Sound is played when pressing the corresponding CALL button.

Hello, I'm trying to get my OEM 21VU running at the moment. Until now, everything was connected via Mobiflight and FSUIPC offsets. I had the issue that quite some buttons had no offsets mentioned in the PDF. I ended up with this list: Buttons: CALLS (all) EMER CALL CVR ERASE CVR TEST MASK MAN ON EME...

How does the keyboard of your MCDU works? Looks a bit like it sends the characters "on press" and "on release" so in the end you have two.

Okay I have this folder with the sub folders but still get the access violations.

on which PC did you put the perf Tool? Make sure you have the c:\A320FMGS\Aircraft folder (with the A320 folder inside) and c:\A320FMGS\PERF folder (also with it's sub folders). You can copy them from FMGS Server PC if needed. I'm facing the same issue. Recompiled the navdata and the dll is in the ...

I got it working now. It was a combination of software and hardware connection problems. After reinstalling jeehell the soft RMP startet working and after reconnecting every wire on the PCB the OEM RMP started working as well

The Soft RMP panel also doesn't work. I can set frequencies in there, but they don't do anything in P3D. I also tried the NAV backup mode and opened the Radio page in the MCDU to check. No frequencies where transfered. Seems to be a more general problem I have. What could cause this? I never used an...

Hi, So I got my CockpitConcept RMP Board and connected my RMP to it and set the IP for jeehell and the RMP. It says that it's connected to P3D, Jeehell, FSUIPC and the RMP but the frequency I'm tuning in doesn't change in P3D and neither the Soft RMP wich I installed to check. Any ideas what might b...

How embarrassing, I found the issue. Apparently P3D decided to assign the Trim to buttons from the Bodnar board. Because of the configuration it spammed a nose down command. Removed this entry together with other weird self assigned configs and now everything, including my assigned keyboard trim key...

I have the CPflight FCU with EFIS selectors, Flightdeck Solution MCDU, Flight Simulation Center Tiller, 2 saitek rudder pedals, 2 Arduino Mega with MobiFlight for buttons and lights and a Leo Bodnar Board for the thrust lever and OEM sidestick. Also few buttons connected to the Leo bodnar.

I installed the Software Thrust Levers to try to adjust the Trim with it. I am not able to move the trim wheel, it remains stuck at -4.0 DN. The thrust levers can easily be moved. This issue results in the Pitch trim disagree message when pushing the TO Config button, wich it obviously should. Can s...