Search found 92 matches
- Thu May 02, 2024 7:04 pm
- Forum: Software support
- Topic: Speed Tape Approach AC becomes unflyable
- Replies: 3
- Views: 18
Re: Speed Tape Approach AC becomes unflyable
Hello Marco Do you perhaps use FSHud? I've had the problem twice before that the plane couldn't be flown with the same symptoms as yours. Even though FSHud certainly doesn't pass any control commands, I'm not sure whether the performance drops somehow and this triggers the uncontrolled behavior This...
- Fri Apr 26, 2024 4:54 am
- Forum: Software support
- Topic: No system sounds
- Replies: 1
- Views: 54
Re: No system sounds
I assume you've checked whether the speakers actually play a Windows 11 sound and whether the volume is turned off? Then the sound.exe can only be started on one PC. I have the problem that I have two speaker outputs that have the same name (Samsung 49'' Screen)and I have to keep checking that I hav...
- Sun Apr 21, 2024 11:30 am
- Forum: Software support
- Topic: Dim weather/radar display
- Replies: 4
- Views: 113
Re: Dim weather/radar display
this is my pots https://www.conrad.ch/de/p/potentiometer-service-rv16af-41-15r1-b5k-rv16af-41-15r1-b5k-dreh-potentiometer-mono-0-125-w-5-k-1-st-1438013.html and this is my knobs https://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=98_75&products_id=198&zenid=7cec7c921f71...
- Sat Apr 20, 2024 3:58 pm
- Forum: Software support
- Topic: Dim weather/radar display
- Replies: 4
- Views: 113
Re: Dim weather/radar display
Hi Dieter
I set this in the "FMGS_Config" under "DUs Dimmer Potentiometers" - After defining and restarting the "FMGS_Config" the axis is empty again, but it still works
I set this in the "FMGS_Config" under "DUs Dimmer Potentiometers" - After defining and restarting the "FMGS_Config" the axis is empty again, but it still works
- Sat Apr 20, 2024 7:19 am
- Forum: Software support
- Topic: Setup Problem with Skalarki Profiler (Software related)
- Replies: 13
- Views: 204
Re: Setup Problem with Skalarki Profiler (Software related)
I also think that you have to enter the IP address of the FMGS server in the Pedestal PC profiler. I assume that you have connected your skalakri hardware to both the main and pedestal PC. I also assume that the profiler is running on both devices. Does the hardware not work on both PCs? What I also...
- Fri Apr 19, 2024 9:58 pm
- Forum: Software support
- Topic: Setup Problem with Skalarki Profiler (Software related)
- Replies: 13
- Views: 204
Re: Setup Problem with Skalarki Profiler (Software related)
Hi
Have you the "P3D V6.0" and "Master P3D PC" installed?
Have you the "P3D V6.0" and "Master P3D PC" installed?
- Wed Apr 03, 2024 11:24 am
- Forum: Software support
- Topic: Tiller Steering
- Replies: 53
- Views: 2118
Re: Tiller Steering
and has with me "aviaWorx Approach Report" showed that "Gear not in Landing Configuration", even though I took the gear out - maybe this will help - this with the B61.3.7
- Sat Mar 23, 2024 9:39 am
- Forum: Software support
- Topic: Tiller Steering
- Replies: 53
- Views: 2118
Re: Tiller Steering
I have the same problem. but also at the takeoff. taxi is no problem.
go back to 60.0.4
go back to 60.0.4
- Thu Mar 21, 2024 7:12 am
- Forum: News
- Topic: A320 FMGS B61
- Replies: 5
- Views: 1120
Re: A320 FMGS B61
Thank you very much for continuing to work on the P3D version!
- Wed Mar 13, 2024 5:52 am
- Forum: Software support
- Topic: in the simpatchlog.txt i have "CD0 removed a changed entry"
- Replies: 2
- Views: 332
Re: in the simpatchlog.txt i have "CD0 removed a changed entry"
Hi JL,
Thank you for the feedback.
So far I haven't noticed any difference.
Thank you for the feedback.
So far I haven't noticed any difference.
- Mon Mar 11, 2024 8:23 pm
- Forum: Software support
- Topic: in the simpatchlog.txt i have "CD0 removed a changed entry"
- Replies: 2
- Views: 332
in the simpatchlog.txt i have "CD0 removed a changed entry"
Hi I noticed that an entry "CD0 removed a changed entry" and "Cn_r removed a changed entry" suddenly appeared in my Simpatchlog.txt. This takes about 15 minutes after "Tables Found" is displayed. What does this mean? 19:53:57 memory scan complete 19:53:57 found table 40...
- Mon Mar 04, 2024 9:33 pm
- Forum: Software support
- Topic: ACC and Trip Fuel
- Replies: 3
- Views: 396
Re: ACC and Trip Fuel
Hi Jean Luc
Thanks for the detailed answer. This is beyond my knowledge for now. But I'll read into it.
Thanks for the detailed answer. This is beyond my knowledge for now. But I'll read into it.
- Mon Mar 04, 2024 3:14 pm
- Forum: Software support
- Topic: ACC and Trip Fuel
- Replies: 3
- Views: 396
Re: ACC and Trip Fuel
Hello I'm bringing this post forward again. I have just done two test flights up to 16,000 feet once with ACC 2920 and once with 4420. In the MCDU the TripFuel showed 0.1 higher for the climb but I used the same amount of fuel in both variants. I also noticed that the higher the V2, the greater the ...
- Sun Feb 25, 2024 9:44 pm
- Forum: Software support
- Topic: ZFW/ZFWCG Calculation
- Replies: 8
- Views: 687
Re: ZFW/ZFWCG Calculation
Hi Michael Unfortunately I don't have a solution either, but I can confirm the situation. This used to be the case, at some point (possibly V58?) the values were identical and for a long time they no longer correspond. Hallo Michael leider habe ich auch keine Lösung, kann aber den Sachverhalt bestät...
- Thu Feb 22, 2024 9:49 am
- Forum: Software support
- Topic: B60.1.5 installer triggers Microsoft Defender
- Replies: 8
- Views: 543
Re: B60.1.5 installer triggers Microsoft Defender
didn't have this problem either
- Wed Feb 21, 2024 5:51 am
- Forum: Software support
- Topic: ACC and Trip Fuel
- Replies: 3
- Views: 396
ACC and Trip Fuel
Hi I took a flight from LSZH to LSGG yesterday. I entered this completely in the MCDU and a trip fuel of 1.3 was displayed on the INIT-B page. This corresponds to the 1260kg from SimBrief. When I entered the ACC according to blackbox711.com https://blackbox711.com/airport-info-charts.html on the PER...
- Mon Feb 19, 2024 8:58 pm
- Forum: Software support
- Topic: Found an Issue on 60.1.4b
- Replies: 4
- Views: 475
Re: Found an Issue on 60.1.4b
Hello Sven
I can confirm this. maybe this has to be the case? If I select "no" at the bottom of "FLS" in the "A320 JeeHell Ware SERVER" under "Aircraft Options", everything is as usual.
I can confirm this. maybe this has to be the case? If I select "no" at the bottom of "FLS" in the "A320 JeeHell Ware SERVER" under "Aircraft Options", everything is as usual.
Re: FS2020
Hi community When I consider that Jean Luc has a "normal" job of 80 - 100%, also has a private life and has developed, mainly alone, this great A320 based on P3D - and is still developing it further for us - I personally believe that it makes more sense for him to concentrate his resources...
- Sun Jan 14, 2024 4:25 pm
- Forum: 3rd Party Software
- Topic: CPDLC QUESTION
- Replies: 15
- Views: 2398
Re: CPDLC QUESTION
If you register at http://www.hoppie.nl/acars/system/register.html you will receive a logon code. This code is important because it is the authorization key for the Hoppie server. You enter this registration code into TopCat. Did you set Network Affiliation to "None" at http://www.hoppie.n...
- Sun Jan 14, 2024 1:09 pm
- Forum: 3rd Party Software
- Topic: CPDLC QUESTION
- Replies: 15
- Views: 2398
Re: CPDLC QUESTION
sounds good anyway.
Since messages are sent via the Hoppie server and not via WideFS, I think your network PC has a problem
Since messages are sent via the Hoppie server and not via WideFS, I think your network PC has a problem
- Sun Jan 14, 2024 8:43 am
- Forum: 3rd Party Software
- Topic: CPDLC QUESTION
- Replies: 15
- Views: 2398
Re: CPDLC QUESTION
In TOPCAT under W&B on the right, go to Loadsheet at the top of ACARS. Now you can select DLH66 under Send Message (assume that P3D and FMGS and CPDLC must be started). You can send the message under Type Telex and with send at the top left. This works perfectly for me and my software. I don't k...
- Sat Jan 13, 2024 1:55 pm
- Forum: 3rd Party Software
- Topic: CPDLC QUESTION
- Replies: 15
- Views: 2398
Re: CPDLC QUESTION
So, I turned this on in TopCat under Config - ACARS and determined the callsign myself and entered the logon code that I received at hoppie.nl. then I downloaded and installed the ACARS ATC client on the hoppie.nl site https://www.hoppie.nl/acars/prg/atc/ and here it is important that I enter a diff...
- Sat Jan 13, 2024 12:15 pm
- Forum: 3rd Party Software
- Topic: CPDLC QUESTION
- Replies: 15
- Views: 2398
Re: CPDLC QUESTION
Hi Mato
I don't use this like you do.
What I found out is that if I send a message from TOPCAT via ACARS, a different account must be set up on the client. That means you have to set up two logon codes at hoppie.nl and for the network I define “None” on hoppie.nl
maybe it will still help
stephan
I don't use this like you do.
What I found out is that if I send a message from TOPCAT via ACARS, a different account must be set up on the client. That means you have to set up two logon codes at hoppie.nl and for the network I define “None” on hoppie.nl
maybe it will still help
stephan
- Fri Jan 12, 2024 3:24 pm
- Forum: Software support
- Topic: Stall at ILS
- Replies: 14
- Views: 3803
Re: Stall at ILS
Hello
ActiveSky is officially released for P3D V6.x - maybe this can fix the problem.
https://cruiselevel.de/nun-offiziell-ac ... d-x-plane/
ActiveSky is officially released for P3D V6.x - maybe this can fix the problem.
https://cruiselevel.de/nun-offiziell-ac ... d-x-plane/
- Thu Jan 11, 2024 10:36 am
- Forum: Software support
- Topic: Thrust osziallation, no "V1" CallOut and new Modell too light?
- Replies: 4
- Views: 1646
Re: Thrust osziallation, no "V1" CallOut and new Modell too light?
hello
Jean Luc removed this in an update. As far as I know, because this callout doesn't come from the plane
viewtopic.php?t=10
Jean Luc removed this in an update. As far as I know, because this callout doesn't come from the plane
viewtopic.php?t=10